Application
Cutting of standard size metal sheets (mild, stainless and carbon steel) with following parameters, m/min (with assistance of oxygen gas):
| materialpower | 100 W | 200 W | 400 W | |
| Mild steel, mm | 0.5 | 2.0 | 6.0 | 10.0 |
|---|---|---|---|---|
| 1.0 | 1.2 | 3.0 | 5.0 | |
| 2.0 | 1.5 | 2.5 | ||
| 3.0 | 1.5 | |||
| Stainless steel, mm | 0.5 | 1.6 | 4.8 | 8.0 |
| 1.0 | 1.0 | 2.4 | 4.0 | |
| 2.0 | 1.2 | 2.0 | ||
| 3.0 | 1.2 | |||
As well as rubber, leather, veneer wood and timber cutting, etc.
Mild steel, 1.5 mm. 200 W
2 m/min
Mild steel, 1.5 mm. 200 W
2 m/min
Mild steel, 3 mm. 200 W
0.5 m/min
Mild steel, 2.5 mm. 160 W
1.2 m/min
Stainless steel, 1.5 mm. 200 W
2.5 m/min
Mild steel, 2 mm. 200 W
1.5 m/min
Stainless steel, 0.8 mm. 200 W
3 m/min
Mild steel, 2 mm. 120 W
1.2 m/min
Mild steel, 1.5 mm. 200 W
2 m/min
Mild steel, 3 mm. 200 W
0.4 m/min
Mild steel, 1.5 mm. 200 W
2 m/min
Stainless steel, 1.5 mm. 200 W
1.8 m/min
Compact size
Our cutting machine is a one-piece compact-size construction requiring minimum area for mounting. Needs no additonal assembly or mounting work. Gets started in few minutes. Fit for exploitation in general industrial conditions.
Model:
MK1020/XX
MK1225/XX
1800
both
3000
3500
1930 mm
2180 mm
Lasers
Our cutting machines have low exploitation cost due to our employment of sealed-off Synrad lasers.
This provides for a 0.1 mm focal spot and as a result up to 5 megawatts/cm2 density of focus emission power which is considerably higher than 1 megawatt/cm2 for mild and stainless steel evaporation.
Use
Mechanics
Drive along all the axes is due to ballscrew steams using “rotary nut” principle and 40 mm diameter fixed screw.
“Flying optics” together with rotary nut contributes to high dynamic parameters.
Basic technical specifications
| Operating space size (X, Y coordinates) | |
|---|---|
| MK1020/XX | 1050×2050mm |
| MK1225/XX | 1300×2550 mm |
| Slide vertical motion (Z coordinate) | 50 mm |
| Setpoint position reproducibility | ±0.1 mm |
| Static positioning accuracy | ±0.1mm; |
| Dynamic positioning accuracy: | |
| at acceeration and stopping segments | ±0.2 mm |
| at straight-line segments | ±0.1 mm |
| at curvilinear segments (with the rate of 2 m/min) |
±0.2 mm |
| Maximum idle motion rate (X, Y coordinates) | 12 m/min |
| Maximum operating rate (X, Y coordinates) | 9 m/min |
| Maximum operating acceleration (X, Y coordinates) | 0.6 m/sec2 |
| Ortogonal deviation between X and Y axis | ±0.8 degrees |
We also produce
Plasma-arc cutting machines — allow sheet metal cutting up to 40 mm thickness, stainless steel up to 20 mm and aluminium up to 10 mm. Table size: 2×3, 2×6, 3×12 meters either with 3 or 5 programmed coordinates.
Mill cutting machines used for cutting and 3D processing of timber, medium density fibreboard and low-density wood chipboard, aluminium, composite materials, glass, stone and plastic materials.
Stone mill cutting machines.
